Product overview
System requirements
Compatible hardware
-
CBEB100.1, ES160.1, ES162.1, and ES165.1 Automotive Ethernet Media Converter
-
ES882.1 and ES886.x ECU Interface Module
PC with one ethernet interface
A PC with one open Ethernet interface (1 Gbit/s or 100 MBit/s, full duplex) with RJ45 connection is required. Ethernet interfaces that are implemented with an additional network card in the PC must feature a 32-bit data bus.
|
Note |
|---|
|
Half Duplex mode and Half Duplex Ethernet interfaces are not supported. |
Requirement to ensure successful initialization of the module
|
Note |
|---|
|
It is imperative you disable the function which automatically switches to powersaving mode on your PC network adapter when there is no data traffic on the Ethernet interface! |
To deactivate the power saving mode
Choose in Windows System Control Center / Device Manager / Network Adapter the used network adapter by double-click. Deactivate the "Allow the computer to turn off this device to save power" option in the "Power Management" register. Confirm your configuration.
The manufacturers of network adapter have different names for this function.
Example:
-
"Link down Power saving".
-
"Allow the computer to turn off this device to save power".
Software requirements for BR_XETK-S3.0A
|
Note |
|---|
|
Operating the BR_XETK-S3.0 with older software versions is not possible. |
|
Microcontroller |
HSP |
INCA |
INCA-MCE |
ETK Tools |
Method |
|---|---|---|---|---|---|
|
TC23x-PD |
V11.10.0 |
V7.2.10 |
V7.2.10 |
V4.1.11 |
DISTAB17 |
|
TC26x-ED
|
V11.6.0 |
V7.2.6 |
V7.2.6 |
V4.1.7 |
DISTAB17 |
|
V11.6.0 |
V7.2.6 |
V7.2.6 |
V4.1.7 |
Trace2Ram |
|
|
TC26x-PD |
V11.8.0 |
V7.2.8 |
V7.2.8 |
V4.1.9 |
DISTAB17 |
|
TC27x-ED
|
V11.5.0 |
V7.2.5 |
V7.2.5 |
V4.1.6 |
DISTAB17 |
|
V11.6.0 |
V7.2.6 |
V7.2.6 |
V4.1.7 |
Trace2Ram |
|
|
TC27x-PD |
V11.8.0 |
V7.2.8 |
V7.2.8 |
V4.1.9 |
DISTAB17 |
|
TC29x-ED
|
V11.5.0 |
V7.2.5 |
V7.2.5 |
V4.1.6 |
DISTAB17 |
|
V11.6.0 |
V7.2.6 |
V7.2.6 |
V4.1.7 |
Trace2Ram |
|
|
TC29x-PD |
V11.8.0 |
V7.2.8 |
V7.2.8 |
V4.1.9 |
DISTAB17 |
|
TC33x-PD |
V12.0.0 |
V7.3.0 |
V7.3.0 |
V4.2.0 |
DISTAB17 |
|
TC36x-PD |
V11.15.0 |
V7.2.15 |
V7.2.15 |
V4.1.16 |
DISTAB17 |
|
TC37x-ED
|
V11.12.0 |
V7.2.12 |
V7.2.12 |
V4.1.13 |
DISTAB17 |
|
V11.12.0 |
V7.2.12 |
V7.2.12 |
V4.1.13 |
Trace2Ram |
|
|
TC37x-PD |
V11.15.0 |
V7.2.15 |
V7.2.15 |
V4.1.16 |
DISTAB17 |
|
TC38x-PD (A-Step) |
V11.8.0 |
V7.2.8 |
V7.2.8 |
V4.1.9 |
DISTAB17 |
|
TC39x-ED (A-Step)
|
V11.5.0 |
V7.2.5 |
V7.2.5 |
V4.1.6 |
DISTAB17 |
|
V11.5.0 |
V7.2.5 |
V7.2.5 |
V4.1.6 |
Trace2Ram |
|
|
TC39x-ED (B-Step)
|
V11.8.0 |
V7.2.8 |
V7.2.8 |
V4.1.9 |
DISTAB17 |
|
V11.8.0 |
V7.2.8 |
V7.2.8 |
V4.1.9 |
Trace2Ram |
|
|
TC37x-XX |
V12.3.0 |
V7.3.3 |
V7.3.3 |
V4.2.3 |
DISTAB17 |
|
TC39x-XX |
V12.3.0 |
V7.3.3 |
V7.3.3 |
V4.2.3 |
DISTAB17 |
|
TC3Ex-PD |
V14.2.0 |
V7.5.2 |
V7.5.2 |
V4.4.2 |
DISTAB17 |
Software requirements for BR_XETK-S3.0C
|
Microcontroller |
HSP |
INCA |
INCA-MCE |
ETK Tools |
Method |
|---|---|---|---|---|---|
|
TC49x (A-Step) |
V13.2.0 |
V7.4.2 |
V7.4.2 |
V4.3.0 |
DISTAB17 |
|
TC4Dx |
V13.4.0 |
V7.5.2 |
V7.5.2 |
V4.4.2 |
DISTAB17 |
|
TC4DxED
|
V13.6.0 |
V7.4.6 |
V7.4.6 |
V4.3.6 |
DISTAB17 |
|
V15.0.0 |
V7.6.0 | V7.6.0 |
V4.5.0 |
Trace2Ram1 |
|
| TC49xED | V14.7.0 | V7.5.7 | V7.5.7 | V4.4.7 | DISTAB17 |
| V15.0.0 | V7.6.0 | V7.6.0 | V4.5.0 | Trace2Ram2 | |
| TC49xPD | V14.7.0 | V7.5.7 | V7.5.7 | V4.4.7 | DISTAB17 |
| TC48xED | V15.0.0 | V7.6.0 | V7.6.0 | V4.5.0 | DISTAB17 |
| V15.0.0 | V7.6.0 | V7.6.0 | V4.5.0 | Trace2Ram3 | |
| TC46xED
|
V15.0.0 | V7.6.0 | V7.6.0 | V4.5.0 | DISTAB17 |
|
V15.0.0 |
V7.6.0 |
V7.6.0 |
V4.5.0 |
Trace2Ram4 |
Data emulation and measurement memory
Data emulation memory
|
Note |
|---|
|
Only the BR_XETK-S3.0A supports external supply emulation memory. |
The BR_XETK-S3.0 uses a portion of or up to the entire size of the ED RAM, to emulate data in internal flash. The following table lists the supported microcontrollers, the size of the ED RAM, and states if the ED RAM is capable of being powered using a standby supply.
|
Microcontroller |
Max. ED RAM |
Standby powered |
|---|---|---|
| TC26x-ED | 512 kByte | Yes |
| TC27x-ED | 1 MByte | Yes |
| TC29x-ED | 2 MByte | Yes |
|
TC37x-ED |
3 MByte |
Yes |
|
TC39x-ED |
4 MByte |
Yes |
|
TC46x-ED |
512 kByte |
No |
|
TC48x-ED |
- |
No |
|
TC49x-ED |
3 MByte |
No |
|
TC4Dx-ED |
5 MByte |
No |
|
TC4Z-ED |
3 MByte |
No |
Measurement data memory
The ED RAM is also used to support other functionalities which reduces the amount of ED RAM available for data emulation. E.g., the page switch mail box and OMD requires typically one tile of ED RAM (64 KB for TC2xx-ED, 256 KB for TC3xx-ED). Trace2Ram requires two tiles of ED RAM (128 KB for TC2xx-ED, 512 KB for TC3xx-ED).
|
Item |
Characteristics |
|---|---|
| Location | Typically located within the emulation memory when using DISTAB17 hooks. Measurement data memory can be located in internal RAM if the entire ED RAM is needed for calibration. |
Trace memory
|
Item |
Characteristics |
|---|---|
| Trace mirror size | 103 measurement values (typ.) |
Configuration
|
Item |
Characteristics |
|---|---|
| Configuration |
1Project-specific configuration for
stored in EEPROM. |
|
Update |
Logic devices updated using HSP software |