CON3: ETAM9 ECU adapter
Usage
The ETAM9 adapts the FETK/ XETK power signals (Molex 6 pin connector) to the ECU with a 5 pin Molex PicoSpox connector.
The ETAM9 cable requires on the ECU side an Vertical SMT Header connector [87437-0543] or an Right Angle SMT Header connector [87438-0543].
ECU signals
|
Pin |
Color |
Signal |
Description |
|---|---|---|---|
|
1 |
Blue |
VDDPSTBY (Supply) |
Permanent power to supply ECU interface |
|
2 |
Yellow |
VDDSTBY (Supply) |
Permanent power to supply ECU ED RAM |
|
3 |
Brown |
GND |
Power ground |
|
4 |
Green |
CAL_WakeUp |
Switch to Ubatt. ECU wake-up signal |
|
5 |
Red |
SGUBATT1 |
Car battery |
|
6 |
- |
- |
No Connect |
Temperature range
|
Condition |
Temperature Range |
|
Operating temperature |
-40 °C to +110 °C -40 °F to + 230 °F |
Order information
|
Product |
Length |
Order Number |
|
ETAM9 F/XETK-S ECU Adapter, MOLEX - MOLE (6fc- 5fc), 0m136 |
0.136 m |
F 00K 111 043 |