CON3: ETAM10_ETAM12 ECU adapter
Usage
ETAM10/ETAM12 adapts the ETK power signals (Molex 6 pin connector) to an ECU with a 6 pin Molex PicoSpox connector.
The ECU connector is available as Vertical SMT Header [87437-0643] or Right Angle SMT Header [87438-0643].
ECU signals
|
Pin |
Color |
Signal |
Description |
|---|---|---|---|
|
1 |
Blue |
VDDPSTBY (Supply) |
Permanent power to supply ECU interface |
|
2 |
Yellow |
VDDSTBY (Supply) |
Permanent power to supply ECU ED RAM |
|
3 |
Brown |
GND |
Power ground |
|
4 |
Green |
CAL_WakeUp |
Switch to Ubatt. ECU wake-up signal |
|
5 |
Red |
SGUBATT2 |
Car battery |
|
6 |
- |
- |
No Connect |
Temperature range
|
Condition |
Temperature Range |
|
Operating temperature |
-40 °C to +110 °C -40 °F to + 230 °F |
Order information
|
Product |
Length |
Order Number |
|
ETAM10 F/XETK-S ECU Adapter, MOLEX - MOLEX (6fc- 6fc), 0m07 |
0.007 m |
F 00K 111 814 |
|
ETAM12 F/XETK-S ECU Adapter, MOLEX - MOLEX (6fc- 6fc) |
0.1 m |
F 00K 112 457 |