Limitations

The Configuration Creator does not provide the full flexibility for configuring reports like it is possible with the EATB WorkerCertain use cases, like certain configurations of charts, are not yet supportedFor these use cases, the evaluation must be based on the Path to config options without using the Configuration Creator. For more information, see Creating a New Report.

Only supported charts can be imported to the Configuration Creator. If the report contains unsupported charts, these are detected and a warning is displayed showing a list of the detected unsupported charts. In order to proceed with import, click Remove and Continue. All unsupported charts are removed and the import continues.

Note
In case of omitting unsupported charts during the import process, EATB does not change the original evaluationResults.json file.

Currently, the Configuration Creator can be used within the following limitations:

• Only specific chart and table types can be used. For more information, see Display Objects.
• DCM files cannot be used.
• Signals with user-defined MATLAB functions are imported but cannot be used. In case such calculated signals are used in your chart configurations, a warning message is displayed when the evaluation is executed. You can choose to run the evaluation anyway but calculated signals with user-defined MATLAB functions are omitted.
• config_diff.eatb files for calculated signals can only be imported, but not edited.
• Function thresholds As opposed to constant threshold: Threshold type that takes four MATLAB anonymous functions (min, low, high, max) as thresholds, which define the green, yellow, and red ranges. Two signals are needed to calculate a function threshold: The values of the first signal (x axis) are used to calculate the threshold values as functions of this signal and to compare the calculated values with the values of the second signal (y axis). are not supported.
• Accepted threshold violations User-defined threshold type that marks previously set thresholds as not critical for the evaluation. are not supported.
• Thresholds for the display types of an “interval” chart cannot be imported to the Configuration Creator. The information about the thresholds that are related to the imported chart are lost.