Assigning Signals to the GPS Map

1. Select a longitude and latitude signal.

2. Optionally, you can define a third value as gradient signal. For the gradient signal, select its type:

   • Continuous

     Define colors for certain values. EATB interpolates the colors in between these point continuously.

   • Discrete

     Define colors and the boundaries for which a switch from one color to another shall happen. By that, specific colors are assigned to color ranges. No color interpolation is performed.

3. By clicking the plus or minus button, you can add or remove gradient values and colors.

4. Additionally, select the value type:

   • Absolute values

     If absolute is selected, the color gradient represents the values specified.

   • Relative values

     If relative is selected, the color gradient automatically adapts to the min/max values of all data with 0 representing 0% = min value and 1 representing 100% = max value.

5. Click Confirm.