Add FMU-based signals

Add new signals based on a Functional Mock-up Unit (FMU) model.

  1. After adding the Add FMU-based signals operation, click Select file.

    Alternatively, you can drag and drop the file onto the input field.

  2. In the file selection dialog, select the FMU file you want to use.

  3. In the Time steps input field, enter a positive value and select the required unit from the drop-down list.

  4. In the Input mapping section, for each entry in the FMU input column, select the corresponding signal from the Signal name drop-down list.

    The available signals in the Signal name drop-down list are based on the selected signal sources. See, Signal source.

  5. In the Output mapping section, for each entry in the FMU output column, enter a name in the Signal name field.

Note  

FMU-based signals may replace existing signals with the same name.

Changing the FMU file resets all input and output mappings.