Add a folder

1. In the Sources step, click .

2. In the folder selection dialog, select the folder containing your measurement files and click Select Folder.

   The folder appears as an expandable entry in the sources list.

3. Use the Signal source checkbox to enable the folder as a source for signal selection in operations.

   By default, no signals from folders are used as signal sources. You can enable them manually.

4. To validate all MF4 files in the folder, click .

   If corrupt MF4 files are found during validation, you can enable the Best-effort repair of structural issues in MDF files checkbox to attempt a best-effort repair. Unreadable sections may be removed during the repair, so it is recommended to work on copies of the original files.

5. To filter files inside the folder, expand it and use the File selection filter field. Wildcards (*, ?) or regular expressions can be used.

6. To refresh folder contents, click .

   If any files were modified externally, deselect and reselect them to reload their signals.

7. To remove the folder from the job, click .

8. To clear all added files and folders, click .

BLF files

If the selected folder contains BLF files, a signal definition file must be provided.

1. To select a signal definition file, click .

2. In the file selection dialog, select a DBC or ARXML file.

3. If a DBC file is selected, enter an integer value in the CAN bus ID input field.

4. If an ARXML file is selected:

   1. In the CAN bus ID input field, enter an integer value.

   2. From the Bus name drop-down list, select a bus.

5. The configuration is applied to all added BLF files.