Add files

  1. In the Sources step, click Add files.

  2. In the file selection dialog, select the measurement files you want to add to the job.

    The validity of MF4 files is automatically checked upon adding. The Valid column displays a green check mark for valid files and a red cross for corrupt ones.

    If a corrupt MF4 file is detected, you can enable the Best-effort repair of structural issues in MDF files checkbox to attempt a best-effort repair. Unreadable sections may be removed during the repair, so it is recommended to work on a copy of the original file.

  3. Click Open.

    The selected files are added to the job.

  4. Use the Signal source checkbox to enable or disable individual files for signal selection.

    By default, the first five added files are activated as signal sources.

  5. To remove a file, click Remove.

  6. To remove all added files and folders, click Clear all.

BLF files

If BLF files are added, a signal definition file is required to interpret the CAN data.

  1. To select a signal definition file, click Select file.

  2. In the file selection dialog, select a DBC or ARXML file.

  3. If a DBC file is selected, enter an integer value in the CAN bus ID input field.

  4. If an ARXML file is selected:

    1. In the CAN bus ID input field, enter an integer value.

    2. From the Bus name drop-down list, select a bus.

  5. The configuration is applied to all added BLF files.