Working with signals with device names

Signals that include a device name are not supported in most processing steps. To work with such signals, you must first create a mapped signal without the device reference using the Signal Mapping step.

1. In the Sources step of the Create job tab, add the measurement file that contains the signals with device names.

2. In the Add operation step, select Signal mapping from the drop-down list and click .

3. In the Signal mapping step, go to the Mapped signal name input field and enter a name for the new signal.

4. In the Candidate signal section:

   • In the Signal name input field, enter the name of the original signal.

   • In the Device input field, enter the name of the device the signal belongs to.

5. (Optional) To add another mapping, click and repeat from step 2.

6. In the Destination step, select the destination format and folder, then click Start job.

7. The file containing the mapped signals without device names is saved to the destination folder. Add this file to a new job to use the signals in subsequent processing steps.