Compression Configuration Area

In the Compression Configuration area (B in ASCMO-DYNAMIC ExpeDes Step 3: Input compression (type "Positioned Compression")), you can define the type and the orientation of compression. There are two types of compression.

• Positioned Compression: With this type, compression focuses on a freely selectable point.

  • Gain: Degree of compression for the selected center (Position)

  • Position: Position of the center of compression

• Edge Compression: This type allows obtaining a compression to one or both edges of the measurement range.

  • Gain: Degree of compression

  • Position: The compression is done for one edge (Left Edge, Right Edge) or both edges (Both Edges) of the area.