Importing Cycle Data

(missing or bad snippet)

To import cycle data, proceed as follows.

In the ASCMO-Cycle Generator window, do one of the following.
- Select File → Import Cycles.
- Click on Import.
The "ASCMO Data Import" window and a file selection window open.
In the file selection window, select the cycle file you want to import and click on Open.

If the file contains several work sheets, the "Select Sheet" window opens.
In that window, select the desired work sheet(s) and click on OK.

The "Time Vector / Sample Time" window opens.
Do one of the following:
- In the "Time Vector" combo box, select the column that contains the time.
- In the "Sample Time" field, enter the desired sample time in seconds.
Click on OK.

The content of the file is loaded into the "ASCMO Data Import" window. The data as well as the names of the data channels are displayed.
In the "Available Data" list, select the data channels you want to import.
Click on Import.

The variables are added to the "Import" list.
If desired, edit the fields in the "Time Base" area.
Click on OK to start the import procedure.

The cycle data file is imported. Once the import is finished, the cycle appears in the "Cycle" area, and the "Scope View" opens with plots o the newly imported cycle.