Setting Project Properties

Proceed as follows:

1. In the ISP view, select File → Properties.

   The "Project Properties" window opens.

2. In the "Customer" and "Project" fields, enter information on the customer and the project.

3. Activate Prevent Model Modification if you want to protect your project against model changes.

   The "Project Protection" window opens.

   

   Proceed as follows:

   1. Enter a password, then click on Protect.

      As soon as you close the "Project Properties" window with OK, the model is protected. You cannot train the model or change the model parameters.

4. Activate Prevent Project File Overwriting if you want to protect the project from changes.

   As soon as you close the "Project Properties" window with OK, the project is protected. You cannot save it.

5. Use the "Comment" field to enter further information.

   Note
   The other fields, i.e. "Measurement File(s)", "Configuration File", "Inputs, "Outputs & Model Types", etc., display project information.

6. Click on OK.

   If you activated Prevent Project File Overwriting, a message window opens. You are asked if you want to save the project with write protection enabled. Do one of the following.

   • Click on Save Protected to save the project immediately.

     You can still work with the project, but you can no longer save it.

   • Click on Don't Save to postpone saving the project.

     Overwrite protection is activated the next time you save the project.