Resetting Several Sequence Calls

Note
This topic applies only to SWCs specified as block diagrams.

Resetting All Sequence Calls and Connectors of a Diagram

In the Tools menu, point to Sequence Calls, then point to Reset and select For Diagram.
Confirm the safety inquiry with OK.
All sequence calls, block-local sequence calls and connectors of the current diagram are reset.

Resetting All Sequence Calls of a Selected Method or Process

Note
This resets only normal sequence calls. Connectors and block-local sequence calls are not reset.

In the Outline tab, select the runnable or method whose sequence calls you want to reset.
In the Tools menu, point to Sequence Calls, then point to Reset and select For Method/Process.
Confirm the safety inquiry with OK.
All sequence calls assigned to the selected runnable/method are reset.

Resetting Selected Sequence Calls and Connectors

In the drawing area, select the diagram elements whose sequence calls you want to reset.
In the Tools menu, point to Sequence Calls, then point to Reset and select For Selection.
Confirm the safety inquiry with OK.
All sequence calls, block-local sequence calls or connectors assigned to the selected elements are reset.

The relevant sequence numbers are set to 0 and the sequence names are deleted. The connecting lines are again shown colored.