Examples: Targets in the Hardware Selection Window
If an ES900 simulation controller is connected to the PC, its entry in the Select Simulation Board field looks as follows:
ES910 – Name:<alias> – SN:<serial number> – IP:<IP address> [<SW>, <syslib version>, <boot mode>,
ProgID=<ID>]
The various parts of the entry are
explained here.
- ES910 is the simulation controller label.
Name:<alias> is the optional name you can assign to the simulation controller.
If you do not specify a name, this part is absent.
- SN:<serial number> is the serial number of the ES910.
- IP:<IP address> is the IP address of the ES910.
- <SW> is the software you used to load a program to the ES1000 (e.g., ASCET or INTECRIO).
- <syslib version> is the version of the hardware system library in use.
- <boot mode> indicates whether the project was started from the Flash memory when the ES910 was switched on (ROM), or whether a download followed power-on (RAM).
- ProgID=<ID> is the identifier <ID> assigned to the project by the software <SW>.
If RTPRO-PC (outdated) is used as simulation controller, its entry in the Select Simulation Board field looks as follows:
RTPRO-PC – Name:<alias> – SN:<serial number> – IP:<IP address> – <direct> – [<SW>, <syslib version>, <boot mode>, ProgID=<ID>]
The various parts of the entry are
explained here.
- RTPRO-PC is the simulation controller label.
Name:<alias> is the optional name you can assign to RTPRO-PC.
If you do not specify a name, this part is absent.
- SN:<serial number> is the serial number of RTPRO-PC.
- IP:<IP address> is the IP address of RTPRO-PC.
- <direct> indicates that RTPRO-PC is connected directly to the PC.
- <SW> is the software you used to load a program to the RTPRO-PC (e.g., ASCET or INTECRIO).
- <syslib version> is the version of the hardware system library in use.
- <boot mode> indicates whether the project was started from the Flash memory when the RTPRO-PC was switched on (ROM), or whether a download followed power-on (RAM).
- ProgID=<ID> is the identifier <ID> assigned to the project by the software <SW>.