Setting up the Automatic Stop

If nothing else is specified, the experiment continues after the end of the signal is reached. The stimulated channel retains the last signal value. You can select a repeat mode for the signal or an automatic stop of the experiment.

Note
The automatic stop overrules the repeat mode. When both are selected, the experiment stops at the end of the signal.

This command is available only when at least one data generator channel is stimulated with a signal.

In the Physical Experiment window, open the Experiment menu and select Automatic Stop (for Signals).
The menu function is marked. When you start the experiment now, it will automatically stop when the end of the signal is reached.
In the Experiment menu, select Automatic Stop (for Signals) once more to deactivate the automatic stop.

The setting of Automatic Stop (for Signals) in the Experiment menu is kept when the experiment is ended, and the experiment environment is closed. The next time you experiment with this component, the old setting is assumed.