Saving the Oscilloscope Data in a File

You can store the measurement data in the file system in either MDF V2.00 or FAMOS format. The file format is standardized and can be read by other ETAS products.

Due to the multitasking behavior of Windows, the data set saved in the file may not always be complete during an offline experiment. Use the data logging feature (see Data Logger) in an online experiment for complete accuracy.

  1. Stop the experiment.
  2. Select one or more channels you want to save.

  3. In the File menu, point to Save Selected Channels and select <format>.

    MDF

    Saves the oscilloscope data in MDF V2.00 format.

    FAMOS 

    Saves the oscilloscope data in FAMOS format.

    Or

  4. In the File menu, point to Save All Channels and select <format> to save the contents of all channels in the oscilloscope.

    The Store measure data window opens.

  5. Select a path and file name for the output file.

  6. Click Open.

    The data of the curves in the current oscilloscope window are stored in the selected format and file.

See also

Data Logger