Reading or Writing Data from the Current Data Set
- In the Outline tab, select the element whose value you want to write.
In the Edit menu, point to Data, then point to Write Back and select Selected Elements or Calibrated Elements.
A list of variables is displayed. If the command Selected Elements has been chosen, all elements currently selected in the Outline tab are shown in the list.
If Calibrated Elements has been chosen, all elements that have been calibrated in the course of the experiment are shown. At first, all variables are selected.
Deselect the variables you do not want to write back and click OK.
The values of the selected elements are written to the current data set of the component. The old values of that data set is overwritten. The current data set is the one that was selected when the experiment was started.
In the Extras menu, point to Reinitialize and select Variables or Parameters or Both to read the data from the current data set.
All variables and/or parameters are assigned the values from the current data set, the values in the experiment are overwritten. This command is not available while the experiment is running.
You can also write the parameter values to external files, or read them from external files.
See also