Setting up the Event Generator

1. Do one of the following:

   • In the Tools menu, point to Event Generator and select Open.

   • Click the Open Event Generator button.

   The Event Generator window opens. It contains an event for every method (for classes and modules) or process (for modules) defined in the component. In addition, a generateData event is present. By default, all events are disabled, so you have to enable the ones you want to use in the experiment.

   Note
   Methods with composite arguments, i.e. array, matrix or component arguments, do not appear in the event generator. No event can be created for them.

2. Select an event.

3. Do one of the following:

   • In the Channels menu, select Enable.
   • Right-click the event and select Enable from the context menu.
4. Repeat these steps for each event you want to enable.
5. In the Channels menu, select Enable again to disable an event.

Methods or processes for which no event has been enabled are not activated and therefore will have no influence on the experiment.

See also

Setting up an Event