Edit Menu (Calibration Windows)

Note
The Edit menu is not available in the 3D graphical editor.

This menu contains a selection of the following functions, depending on the type of the calibration window.

Undo Last Change

Undoes the last change.

Redo Last Changed

Restores the last change.

Copy (<Ctrl> + <c>)

Copies a calibration variable into the clipboard.

Paste (<Ctrl> + <v>)

Pastes a calibration variable from the clipboard into the window.

Copy Entire Data Into Clipboard

The composite calibration variable (array, matrix, characteristic line/map) active in the table editor is copied into the clipboard and can be inserted into other applications (e.g. Excel) from there and then processed further.

Select All Values (<Ctrl> + <a>)

Selects all values.

Block Selection

Allows you to select several values on a curve.

Decrement or Decrement Value (<Ctrl> + <n>)

Decrements selected values by a defined step.

For arrays/matrices of enumeration or record type, this menu option selects the enumerator or record data set immediately above the current enumerator or record data set. If the current enumerator or record data set is the first one, the array/matrix value remains unchanged.

Increment or Increment Value (<Ctrl> + <m>)

Decrements selected values by a defined step.

For arrays/matrices of enumeration or record type, this menu option selects the enumerator or record data set immediately below the current enumerator or record data set. If the current enumerator or record data set is the last one, the array/matrix value remains unchanged.

Add Offset (<+>)

Adds a defined offset <x> to selected value(s).

For arrays/matrices of enumeration or record type, an offset <x> is rounded to the nearest integer <i>, and the enumerator or record data set <i> places above (negative offset) or below (positive offset) the current enumerator or record data set is selected. If there are less than <i> places above (negative offset) or below (positive offset) the current enumerator or record data set, the array/matrix value is set to the first or last enumerator or record data set.

Multiply By Factor

Multiplies by one or several values.

Set to Default '<1st enum>'

Note
Only available for arrays/matrices of enumeration or record type.

Sets the selected array/matrix value(s) to the first enumerator or data set.

Fill With Values

Replaces one or several values by another value.

Decrement X Axis Point

Shifts x axis point to the left.

Decrement Arg

Shifts axis point in 2D graphical editor to the left.

Increment X Axis Point

Shifts x axis point to the right.

Increment Arg

Shifts axis point in 2D graphical editor to the left.

Add X Axis Point

Adds x axis point.

Remove X Axis Point

Removes the x axis point.

File In Data

Reads the data for an array or a table from a file

File Out Data

Writes the data from an array or a table to a file.